![background image](http://html.mh-extra.com/html/h-p-cosmos/arsalis-gaitway-3d/arsalis-gaitway-3d_service-manual_574521064.webp)
gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 60
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
11.
The treadmill will start moving at different
speeds up to the max speed. Ensure that
nothing touches the treadmill and that
nothing is on the treadmill. Do not touch the
treadmill during this procedure. Follow the
instructions given by the calibration software.
12.
The speed calibration is now finished, press
SAVE to store the new calibration factors for
the speed sensor Report maximum error
given by the gaitway-3D[Service] software.
Max E<1%
Max E=
13.
In the gaitway-3D[Service] software, select
“Vertical force sensors calibration”.
14.
Ensure that nothing touches the treadmill
and that nothing is left on the treadmill.
15.
Prepare a calibration mass as requested by
the software. Measure precisely its weight
on the weight scale.
16.
Follow the instructions of the gaitway-
3D[Service] software to place the mass on
the treadmill and make the recordings. If a
test subject is used, instruct him to stop
moving and breathing during the records.
17.
Repeat twice the steps
masses as requested by the software.