GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 294 / 338

294
Multiviewer SDC
Logging - Spigot 1 to 16
The configuration of this page is the same as for Essence Processing. See Logging - FPGA ,
on page 153.
Logging - Spigot 1 to 16
The
Logging - Spigot
pages are used to view and select the Spigot log fields to be enabled
for each available spigot.
The configuration of this page is the same as for Essence Processing. See
Logging - Spigot 1
to n , on page 154.
Logging - NMOS
The
Logging - NMOS
pages are used to select the fields to be logged for the card’s NMOS
connection to the registry.
The configuration of this page is the same as for Essence Processing. See
Logging - NMOS ,
on page 156.
Logging - Card Diagnostics
The
Logging Card Diagnostics
page is used to view log fields of the Multiviewer SDC and
select those log fields to be enabled.
The configuration of this page is the same as for Essence Processing. See
Logging - Card
Diagnostics , on page 158.
RollTrack
The
RollTrack
page sets up RollTrack settings for the UCP - 3901 Card allowing information
action events to be triggered by the state of multiviewer head display outputs on spigots 1
to 4.
The configuration of this page is the same as for Essence Processing. See
RollTrack , on
page 160.
Loopback Router
The Loopback Router page is used to control a basic, internal ‘IP routing’ facility, which will
loop IP flows from source spigots back into destination spigots. This is not used in normal
operation.
Note: A
Multiviewer SDC:
• Sends out up to 4 video IP multiviewer head streams on (source)
spigots 1 to 4.
• Receives up to 12 video IP multiviewer input streams on
(destination) spigots 5 to 16.