GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 290 / 338

290
Multiviewer SDC
Link Control
Link Control
The Link Control page allows 4K UHD spigots to be aggregated and synchronized by the
UCP - 3901 Card: input video IP streams (destination spigots, 5 to 16) or Multiviewer SDC
multiviewer head display outputs (source spigots 1 to 4). Inputs/outputs can be set to be
single or quad-link.
Figure 9 - 6: Link Control page
Parameter Description
Spigots When Enable is set, this show the 4 spigots that are to be used for the
quad link signals. These spigots must be configured for HD signals.
See Spigot 1 to 4 (Multiviewer Head Outputs) , on page 292 and Spigot
5 to 16 (Multiviewer Inputs) , on page 292.
On the rear panel, see 3G / HD / SD SDI I/O – Serial digital video inputs
/ outputs (12) , on page 35 to know on which HD-BNC input / output
each spigot is available.
Enable Enable the spigots to be used for UHD Quad Links as required. Note
that these controls are not available when using 12G.
TPG / SDQS Set the quad link mode:
• Deselect the SDQS check boxes as required to use two-sample
Interleave (2SI). See Configuring the Streams for use with 4K UHD
Two-Sample Interleave Division , on page 111.
• Set the SDQS check boxes as required to use Square Division
signals. See Configuring the Streams for use with 4K UHD SQDS ,
on page 112.