GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 300 / 338

300
Multiviewer SDC
System - Setup
Software Version Shows the currently installed Multiviewer SDC software version
number.
Build Number Shows the build number of the currently installed Multiviewer SDC
software.
System Reset Reboots the UCP - 3901 Card. This is used to make any
System-Setup
template configuration setting changes take effect. Performing a
system reset makes the multiviewer use the new settings.
A system reset reboots the multiviewer by
effectively powering it
down and then powering it back up: This will produce a picture
disturbance on all multiviewer head display outputs and network
connections.
A reboot takes approximately 75 seconds.
RollCall Settings The RollCall settings in the System-Setup template are used to allow
Grass Valley Orbit software applications to control the Multiviewer
SDC and should normally be changed if you have multiple
Multiviewer SDC running on UCP - 3901 Cards on the same RollCall
network.
RollCall Network Enter the RollCall network number. The network number forms part of
the unit’s RollCall address; this is not an IP network address.
See About the RollCall Address , on page 301 for more information.
RollCall Unit Enter the RollCall unit number. The unit number must be unique for
each Multiviewer being configured. The initial default value is 01 .
See About the RollCall Address , on page 301 for more information.
RollCall Port This parameter is not used.
RollCall IP Port This parameter is not used.
Domain ID Enter RollCall domain ID.
See
About the RollCall Domain ID , on page 301 for more information.
Output Format The
Output Format
of multiviewer head display outputs is set for all
of the multiviewer display outputs. All outputs share the same format.
Format Selection Select the display output format.
Note:
4K/UHD Output:
When driving a 4K/UHD monitor, each
Multiviewer SDC head
display output drives one quadrant of the UHD monitor.
Some 4K/UHD monitors have four 1080P inputs, so they can be fed
from four
Multiviewer SDC 1080p outputs. If this is not the case, a
separate adapter must be used to convert four
Multiviewer SDC
display outputs to a single 4K signal suitable for the monitor.
Information Box These are text fields which allow you to enter the name, location and
notes about your multiviewer unit, for future reference.
To enter/modify text in the text box, type directly into the editable
text field and click . To return to the default text, click .
Name You can give your multiviewer a meaningful name, making it easier to
identify by its role or purpose. Maximum 32 characters. Click or
press return to save the name locally.
Parameter Description