GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 220 / 338

220
MADI Processing SDC
Logging - System
The logging page comprises three columns:
Enable check boxes to activate log fields as required.
Logging Page
Column Description
Log Enable Select the check boxes that correspond to the parameters for which
log information should be collected.
Log Field Displays the name of the logging field.
Log Value Displays the current log value.
Log Field Parameter Description
SN= Logs the card serial number, which consists of an S
followed by eight digits.
Note : this cannot be deselected.
OS_VERSION= Logs the operating system name and version.
BUILD_NUMBER= Logs the build number.
HARDWARE_VERSION= Logs the hardware version number.
HARDWARE_MOD= Logs the hardware modification number.
HARDWARE_BUILD= Logs the hardware build number.
FEATUREBOARD_VERSION= Not applicable. Logs the rear card daughter board
version number.
FEATUREBOARD_MOD= Not applicable. Logs the rear card daughter board
modification number.
FEATUREBOARD_BUILD= Not applicable. Logs the rear card daughter board
build number.
FIRMWARE_VERSION= Logs the FPGA version number.
UPTIME= Logs the time since the last restart in the format
ddd:hh:mm:ss .
RC_UPTIME= Logs time RollCall has been up in the format
ddd:hh:mm:ss .
ROL_STATES= Logs the RollCall status. Valid values are:
OK
FAIL:n
where n is the RollTrack index or indexes
which are failing
Disabled
REAR_ID= Logs the model number of the currently installed rear
panel.
REAR_STATUS= Logs the status of the rear panel when this can be
determined.
SLOT_WIDTH= Logs the slot width. UCP - 3901 / IQUCP25 cards are
available in single, double, and triple width.