GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 146 / 338

146
Essence Processing SDC
Logging - Network
Parameter Description
LAN_PORT _N_ NAME= Logs the Ethernet port name.
LAN_PORT _N_ SPEED= Logs the Ethernet connection speed. Valid values
are:
10 Mbit/s Full Duplex
10 Mbit/s Half Duplex
100 Mbit/s Full Duplex
100 Mbit/s Half Duplex
1 Gbit/s Full Duplex
10 Gbit/s
25 Gbit/s
50 Gbit/s
No Link
LAN_PORT _N_ IPADDRESS= Logs the Ethernet port IP address.
LAN_PORT _N_ GATEWAY= Logs the network gateway IP address.
LAN_PORT _N_ SUBNET_MASK= Logs the IP network’s subnet mask.
LAN_PORT _N_ MACADDRESS= Logs the Ethernet port MAC address.
LAN_PORT _N_ STATE= Logs the Ethernet connection state. Valid values
are:
Active
WARN:Inactive
LAN_PORT _N_ TRAFFIC_IN= Logs speed of traffic received by the Ethernet port.
Values are reported in kbps, Mbps or Gbps, as
appropriate.
LAN_PORT _N_ TRAFFIC_OUT= Logs speed of traffic transmitted by the Ethernet
port.
Values are reported in Kbps, Mbps or Gbps, as
appropriate.
LAN_PORT _N_ CPU_TRAF_IN_STATE= Logs whether the flow of data into the CPU is
satisfactory. Valid values are:
OK
WARN:LOW DATA
FAIL
LAN_PORT _N_ CPU_TRAF_OUT_STAT
E=
Logs whether the flow of data out of the CPU is
satisfactory. Valid values are:
OK
WARN:LOW DATA
FAIL
LAN_PORT _N_ RTP_DIS_RATE= Logs RTP discontinuity rate for the Ethernet port.
LAN_PORT_ N _LINK_STATE= Logs the Ethernet link state. Valid values are:
OK
WARN:DOWN