GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 80 / 338

80
Essence Processing SDC
Firmware Naming Convention
Firmware Naming Convention
Product firmware file names, such as found in the Card Firmware > New pane (see Setting
Spigot Configuration on page 77), adopt the following naming convention:
The different elements making up the file name are separated by spaces, except for FEC
and
SDI Format
values, which are separated by a colon and a space. The
SD Interface
and
Number of IP Interfaces
values are enclosed by brackets and separated by a comma and a
space. If required, RX / TX values are also enclosed by brackets, and inserted after the
Number of IP Interfaces values. For example:
12/4 FC: SD - 3G (1 × SDI, 1 × 2022 - 6(RX), 1 × 2110 - 20/30/40)
IQUCP2500 Card Firmware
The following configurations are available when using the IQUCP2500 rear:
I/O FEC
a
a.10GbE interfaces do not support FEC.
SDI Format SDI Interface Number of IP
Interfaces
b
b.This applies in both directions unless specified otherwise:
(RX) = IP Receive side only
(TX) = IP Transmit side only
Options
0/16
0/4
4/12
8/8
8/0
12/4
16/0
‘None’
RS =
RS - FEC
FC =
FC - FEC
SD - 3G = SD/HD/3G
SD - UHD =
SD/HD/3G/12G
1 × SDI = 1 BNC
4 × SDI = 4 BNC 1 × 2110 - 20/30/40
1 × 2022 - 6
1 × VC2
4 × 2110
- 20/30/40
+FS = Input
Frame Sync
Use Case Available Configurations
Use Case 1
0/8 FC: SD - 3G (1 × SDI, 1 × VC2, 1 × 2110 - 30/40)
8/8 FC: SD - 3G (1 × SDI, 1 × 2022 - 6, 1 × 2110 - 20/30/40)
16/0 FC: SD - 3G (1 × SDI, 1 × 2022 - 6, 1 × 2110 - 20/30/40)
0/16 FC: SD - 3G (1 × SDI, 1 × 2022 - 6, 1 × 2110 - 20/30/40)
12/4 FC: SD - 3G (1 × SDI, 1 × 2022 - 6, 1 × 2110 - 20/30/40)
4/12 FC: SD - 3G (1 × SDI, 1 × 2022 - 6, 1 × 2110 - 20/30/40)
8/0 FC: SD - 3G (1 × SDI, 1 × VC2, 1 × 2110 - 30/40)
0/8 FC: SD - 3G (1 × SDI, 1 × VC2, 1 × 2110 - 30/40)
4/4 FC: SD - 3G (1 × SDI, 1 × VC2, 1 × 2110 - 30/40)