GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 153 / 338

153
UCP - 3901
User Manual
Logging - FPGA
The
Logging FPGA
page shows FPGA messages reporting temperature and voltages for an
FPGA device on the UCP - 3901 / IQUCP Card. Information on several parameters can be
made available to a logging device connected to the RollCall network. For the UCP-3901,
logging must be configured and enabled; see Logging - Configuration (UCP - 3901 Only) on
page 137.
Figure 6 - 33:
Logging - FPGA Page
The logging page comprises three columns:
Enable check boxes to activate log fields as required.
Where N is the input number .
Logging Page
Column Description
Log Enable Select the check boxes that correspond to the parameters for which
log information should be collected.
Log Field Displays the name of the logging field.
Log Value Displays the current log value.
Parameter Description
TEMP_ N _NAME= Reports temperature sensor name.
TEMP_ N _CELSIUS= Reports current temperature sensor reading.
TEMP_N_STATE= FPGA temperature: OK or FAIL .
VOLTAGE_ N _NAME
=
Voltage sensor name.
VOLTAGE_ N _VALUE
=
Reports current voltage reading.