GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 231 / 338

231
UCP - 3901
User Manual
Where N is the input/(Q)SFP number and X is the lane. To identify SFP 1 / 2, see Rear Panel and
Connectors on page 32.
SFP_ N _SERIAL_NR= Logs the card serial number, which consists of an S followed
by eight digits.
SFP_ N _REVISION= Logs manufacturer revision number.
SFP_ N _CONNECTOR= Logs connector type.
TEMP_ N _NAME= Logs temperature sensor name.
TEMP_ N _CELSIUS= Logs current temperature sensor reading.
TEMP_ N _STATE= Logs temperature sensor state. Valid values are:
WARN:Disabled: Temperature sensor disabled.
WARN:Low: Low, but in tolerance.
WARN:High:
High, but in tolerance.
OK
FAIL:Low:
Low and out of tolerance.
FAIL:High: High and out of tolerance.
VOLTAGE_ N _NAME= Logs voltage sensor name.
VOLTAGE_ N _VALUE= Logs current voltage reading.
VOLTAGE_ N _STATE= Logs temperature sensor state. Valid values are:
OK
WARN:Low:
Low, but in tolerance.
WARN:High:
High, but in tolerance.
SFP_ N _WAVELENGTH= Logs transmit wavelength in nm.
SFP_ N _ X _LASER_BIAS= Logs bias level in mA.
SFP_ N _ X _TX_POWER= Logs transmit power level in dBm.
SFP_ N _ X _TX_POWER_STATE
=
Logs transmit power level. Valid values are:
OK
WARN:Low: Low, but in tolerance.
WARN:High:
High, but in tolerance.
FAIL:Low:
Low and out of tolerance.
FAIL:High: High and out of tolerance.
SFP_ N _ X _RX_POWER= Logs receive power level in dBm.
SFP_ N _ X _RX_POWER_STATE
=
Logs receive power level. Valid values are:
OK
WARN:Low: Low, but in tolerance.
WARN:High: High, but in tolerance.
FAIL:Low:
Low and out of tolerance.
FAIL:High:
High and out of tolerance.
SFP_N_POWER_DRIVER=
UCP-3901 only Power supply to the SFP is OK or FAIL .
Parameter Description