GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 252 / 338

252
Getting Started with the Multiviewer
Getting Started Introduction
Getting Started Introduction
This section describes a quick set up procedure to carry out basic setting up of the
UCP - 3901 and basic exercising of the Multiviewer SDC.
The UCP - 3901 Card from the factory must be licensed to carry out one of the software-
defined core functions it is capable of. A new UCP - 3901 Card contains all available software-
defined cores, including the Multiviewer SDC, but no licenses are present.
A new module defaults to the Essence Processing SDC functionality and will need to be
licensed for the Multiviewer SDC in order to be used as a multiviewer.
Getting Started Procedure
The procedure below carries out some basic setting up of a UCP - 3901 Card to configure it
be a Multiviewer SDC; this includes selecting the multiviewer core and setting up Ethernet
interfaces. The procedure will then describe how to configure the Multiviewer SDC for
receiving and sending video IP streams and modifying the multiviewer video wall.
This procedure includes:
• STEP 1: Preliminary Multiviewer SDC Configuration , on page 253.
• STEP 2: UCP - 3901 Media Interface(s) Setup (Video IP Streams) , on page 255.
• STEP 3: Make a Change to the Video Wall , on page 257.
Assumptions
It is assumed that:
• The UCP - 3901 is new and from the factory.
• The UCP - 3901 Card has been installed into the frame. See UCP - 3901 Card Installation
and Operation , on page 27.
• A control network is available to configure the card. See Connections and Cabling , on
page 53.
• A media network is available to:
• source video IP streams for the module; and
• receive multiviewer head display output video IP streams from the module.
• You have established a RollCAll connection with the card. See First Time Connection to
the UCP - 3901 / IQUCP25 / IQUCP50 Card with RollCall , on page 60.
• The multiviewer license has been installed on the card. See Available Upgrade Licenses
for IQUCP25 / IQUCP50 , on page 25 for a list of available licenses. See Installing a
License into a UCP - 3901 / IQUCP25 / IQUCP50 , on page 314 to install the license(s).
• The firmware in the UCP - 3901 has been upgraded to the latest available firmware. See
Upgrading the UCP - 3901 / IQUCP25 / IQUCP50’s SDC Application , on page 309.