GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 211 / 338

211
UCP - 3901
User Manual
Mappings Click to set the audio mode for a spigot.
Pass-through: Sets a 1:1 correspondence between the input audio
channel and the output audio channel. For example, inputs 1 to 64
will be assigned to outputs 1 to 64.
All Mute:
Mutes all audio channels for a spigot.
All Tone: Activates a test tone on all audio channels of an input spigot
according to the
Audio Tone
parameter as configured on the
Input
Spigots
page. See
Audio Tone
in Input Spigots on page 201. This
applies to spigots 1 to 8 only. See also MADI Signal Conversion
Direction by Spigot Number on page 200.
Custom: Audio shuffle is enabled. There is no longer a 1:1
correspondence between the input audio channel and the output
audio channel.
NOTE:
If a preset is selected and the routing then
changed manually, the Custom option will be highlighted as described
above. However, if the routing is then changed to match a preset, the
Custom
option remains highlighted; the matching preset is NOT
detected or highlighted.
Audio Shuffle /
Source /
Destination
Channel
Set the audio option:
• Shuffle audio channels by clicking on the cross-point between a
Source
and a
Destination channel
.
• Mute audio channels by clicking Source Mute for the
Destination channel
.
• Activate a test tone by clicking Tone for the Destination channel .
The tone can be configured for individual spigots. See
Audio
Tone
in Input Spigots on page 201.
Parameter Description