GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 156 / 338

156
Essence Processing SDC
Logging - NMOS
Logging - NMOS
The Logging - NMOS pages are used to select the fields to be logged for the card’s NMOS
connection to the registry. Information on several parameters can be made available to a
logging device connected to the RollCall network. For the UCP-3901, logging must be
configured and enabled; see Logging - Configuration (UCP - 3901 Only) on page 137.
Fig. 6-36: Logging - NMOS Page
The logging page comprises three columns:
Logging Page
Column Description
Log Enable Select the check boxes that correspond to the parameters for which
log information should be collected.
Log Field Displays the name of the logging field.
Log Value Displays the current log value.
Parameter Description
NMOS_STATUS= Displays the current NMOS status. Valid values are:
OK:Off:
NMOS functionality is disabled.
OK:Registered:
the module has been successfully added
to the NMOS registry.
WARN:Registering:
the module is currently being
registered.
FAIL
:
Unregistered:
the registration process has failed.
NMOS_REGISTRATION= The current card’s NMOS registry connection mode:
Auto: automatic discovery of the NMOS registry using DNS
Service Discovery (DNS-SD), as described in AMWA IS-04
NMOS Discovery and Registration Specification v1.2.
Static: manually specified NMOS registry values for
address, registration port and query port.
See
NMOS on page 96 for information on these settings.
NMOS_REGISTRY_IPADDRESS
=
The current NMOS registry’s IP Address being used to
connect to the NMOS registry.