Gima 35152 Скачать руководство пользователя страница 36

Страница: 36 / 153

by the system, which can not be changed by user.

The level of most of the physiological alarms need to be set by user, such as alarm limits.

5.3 Alarm mode

When alarm occurs, the monitor may draw the user’s attention in three ways as below

：

Audio alarm

Light alarm

Alarm message

5.3.1 Audio alarm

When alarm occurs, the monitor will make different sound to indicate alarms in different levels.

High: "beep-beep-beep----beep-beep, beep-beep-beep----beep-beep", frequency: every 8 seconds

Medium: "beep--beep-beep", frequency: every 8 seconds

Low: "beep", frequency: every 8 seconds

Sound pressure range: 45 dB

～

85 dB

5.3.2 Light alarm

When alarm occurs, the alarm indicator will prompt different levels of alarms with different colors and flicker

frequencies..

High: alarm indicator flickers in red with high frequency

Medium: alarm indicator flickers in yellow with low frequency

Low: alarm indicator lights in yellow without flickering

5.3.3 Alarm message

When alarm occurs, alarm messages will be displayed in physiological alarm area and technical alarm area. For

physiological alarms, the following marks will be used in front of the messages to indicate the alarm level.

High: ***

Medium: **

Low: *

The system also adopts different background to indicate the alarm level of physiological alarm and technical alarm.

High: red

Medium: yellow

Low: yellow

NOTE:

If one monitoring system has multiple alarm equipment, when an alarm occurs, the visual and audio

prompts generated by all alarm equipment should keep the same.

The way of alarm prompting is related to its level.

When alarms of different levels occur at the same time, the monitor prompts the highest level alarm among

them.

5.4 Alarm setup

Select "ALARM SETUP" item in the "SYSTEM SETUP" menu, the initial password is "70808". Under this interface,

Содержание 35152


























































































































































Результаты поиска

Содержание 35152

Отзывы:

Похожие инструкции для 35152

Бренды по названию

Популярные бренды

Gima 35152, Руководство пользователя

Результаты поиска

Содержание 35152

Отзывы:

Похожие инструкции для 35152

Бренды по названию

Популярные бренды