Gima 35152, Руководство пользователя

Страница: 34 / 153

26
(dynamic IP of this monitor, gateway, DNS, etc.) through the DHCP. If specified IP is used, please set the IP address of
this monitor and subnet mask, click "LOCAL IP CONFIG" button, the following menu will pop up:
Wire
When the network type is CMS, just make sure the connection between the device and the central station is successful.
(The IP address of the server is 202.114.4.119, the IP address of this monitor and subnet mask are generated by the port
number.)
When the network type is CUSTOM, make sure the monitor is connected to the router. If DHCP service is used, the
device will automatically obtain the network support (dynamic IP of this monitor, gateway, DNS, etc.) through the
DHCP. If specified IP is used, please set the IP address of this monitor and subnet mask.
n
LOCAL NET NO: the physical bed number of the monitor
n
SERVER IP: input the IP address or domain name of the server for central station software
n
LOCAL IP CONFIG: when the "NET TYPE" is "CUSTOM", you can set the local IP address
n
SELECT ROUTE: when the "LAN CARD SET" is set to "WIRELESS", click this button to enter the "SELECT
ROUTE" menu, and start router searching and other operations.
4.8 Demo
Select the "DEMO" item in the "SYSTEM MENU" to enter the "DEMO KEY" dialog box. Input the password "2088",
and click "CONFIRM" button, the system will enter DEMO status.
The demo waveform is an analog waveform set by the manufacturer only to show the performance of the machine and
to train users.
In clinical application, this function is forbidden because it may mislead the medical staff to treat the DEMO waveform
and parameters as the actual data of the patient, which may result in the delay of treatment or mistreatment. Therefore
before entering this menu, you shall enter the password.