Gima 35152 Скачать руководство пользователя страница 114

Страница: 114 / 153

106

Chapter 19 Maintenance

WARNING

The hospital or medical institution using the device should establish a perfect maintenance plan, otherwise

it may result in device failure and unpredictable consequences, even endanger personal safety.

All safety inspections or maintenance works to the components to be disassembled should be carried out by

professional service personnel, otherwise it may result in device failure, even endanger personal safety.

If any problem has been found, please contact the service person or our company.

19.1 Check

The device should be completely checked before using, or after continuous use of 6 to 12 months, maintenance or

upgrading, to ensure normal operation and working.

The items to be checked should include:

Environment and power meet the requirements.

No abrasion and good insulation performance for the power cord.

No mechanical damage for the device and accessories.

The accessories specified are used.

Alarm functions are normal.

The recorder works normally, the recording paper conforms with specified requirements.

Battery performance.

Each monitoring function is in good working state.

Ground impedance and leakage current conform requirements.

If any signs of damage to the instrument can be found, please don't use the monitor to perform any monitoring on the

patient. And contact the medical engineer of the hospital or the maintenance engineer of the company.

All inspections that require to open the device must be carried out by qualified service personnel. Safety and

maintenance inspections may also be carried out by personnel of the Company.

19.2 Troubleshooting

Power failure

Install the battery when using the device. As if the mains is disconnected, the device supplied power by the battery,

which only sustains a period of time, and it will be automatically switched to mains when it is connected. A low battery

voltage will trigger a high-tech alarm "Low battery", and it will shut down after the first alarm (about 5 minutes), then

all trend data will be lost.

Troubleshooting

Other problems related to ECG measurement

Symptoms

Possible reasons and solutions

Noisy ECG signal or no QRS

waveform is checked.

• Make sure that the patient does not tremble.

Incorrect ECG filter.

Содержание 35152


























































































































































Результаты поиска

Содержание 35152

Отзывы:

Похожие инструкции для 35152

Бренды по названию

Популярные бренды

Gima 35152, Руководство пользователя

Результаты поиска

Содержание 35152

Отзывы:

Похожие инструкции для 35152

Бренды по названию

Популярные бренды