General DataComm SC-ADT 16 Por, Руководство по установке и эксплуатации

Страница: 98 / 106

Application Guidelines General Application Information
A-6 SpectraComm ADT 076R172-000
Installation and Operation Manual Issue 6
admin Defines a administrator
password A quoted string; 72 chars max
$gdc_adt_admin$
supv Defines a supervisor
password A quoted string; 72 chars max
$gdc_adt_supervisor$
en-pass Controls admin/superv login using
passwords
Enable or Disable
fallback Controls fallback to local
authentication
Enable or
Disable
server Defines the server
location Server IP address (a.b.c.d)
Per-server key: Quoted string, 72 chars max
(optional)
Per-server timeout (optional)
(Default is no server specified)
key Sets a default
encryption key Quoted string, 72 char max
(No default)
timeout The interval the device will wait for
the server to respond
before trying the next server on the
list.
1 to 10 seconds,
5
Configure Time Controls the use of Simple
Network Time Protocol (RFC2030)
and Time Protocol (RFC 868)
Enable or
Disable
Note: When configured for SNTP or TP, the device will receive and use Greenwich
Mean Time (GMT) to timestamp any generated SNMP traps, System Messages and
Alarms. When neither SNTP nor TP is configured, the device will use a relative
System Up Time for timestamping.
Time protocol Selects the time protocol
SNTP1, SNTP2, SNTP3 , SNTP4 or TP
Time server Defines the location of the time
server Time server IP address (a.b.c.d)
Per-server NTP version 1-4 (optional)
(Default is no server specified)
IP-route add Defines a static route that adds an
entry to the routing table for a
specific destination IP address or
subnet. Interface name: ethernet0, modem0, or
modem1
Destination IP network address (a.b.c.d)
Destination IP mask (a.b.c.d)
Destination IP gateway (a.b.c.d)
Metric (1-255) (No default)
IP-route default route Defines a default route that is the
IP address of the next hop when
no other routes are known Interface name: ethernet0, modem0, or
modem1
Default router IP address (a.b.c.d)
(No default)
Table A-1 Configuration Parameters and Defaults
Configurable Option Description Parameters and Defaults