General DataComm SC-ADT 16 Por Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 106

background image

Additional Features

Authentication Protocol

5-4

SpectraComm ADT

076R172-000

Installation and Operation Manual

Issue 6

6. To configure SC-ADT for your user-defined supervisor/admin privilege accounts, type the

following commands using double-quoted strings for the name:

configure admin

“name”

configure supv

“name”

Note

User-defined accounts on the server must match those on the client (SC-ADT).

7. If desired, enable authentication for supervisor/admin privilege by typing:

configure en-pass enable

Note

If the authentication for the console or supervisor/admin privilege is enabled but the
authentication is disabled, then the console or supervisor/admin privilege will be locally authenticated.

8. Authentication banners can identify the SC-ADT device a user is trying to access, and whether

local or authentication is in use. If spaces are to be used in the description, use the
“double-quoted string” format. To configure authentication banner, type:

configure banner

[description]

configure banner local

[description]

Verification Procedure

When a SC-ADT device is enabled for authentication, it is highly recommended that
authentication be tested before exiting the SC-ADT configuration session. The
following test verifies whether the server is reachable and responding, and whether the
key is properly configured.

Note

IMPORTANT! Failure to test the authentication can result in lockout of all users even from the
console port. If possible, observe the console window on the server for any error messages.

1. Ping the server to be sure it can be reached from SC-ADT device:

ADT-16% ping

[IP address]

2. Once the server responds to the ping, test authentication by typing:

configure testing authen

3. Respond to the prompt with your username and password, just like Telnet. After the password

is entered, a pass or fail indication and some diagnostic information will display concerning
message exchange with the server.

4. Test the supervisor/admin password by typing:

configure testing sup-admin

5. Respond to the prompt with your enable password.

«
...
70
71
72
73
74
...
»

Содержание SC-ADT 16 Por











































































































Отзывы:

Нет отзывов

Похожие инструкции для SC-ADT 16 Por

System x3630 M4

Бренд: IBM Страницы: 7

SAFETank Series

Бренд: Raidon Страницы: 49

OXTOPUS EIA-709

Бренд: OCCITALINA Страницы: 54

Бренд: IDT Страницы: 281

DMX-Universal-Demux

Бренд: DMX4ALL Страницы: 17

Бренд: Rockwell Automation Страницы: 108

Бренд: Maxim Страницы: 26

Бренд: NetComm Страницы: 3

ThunderLAN TNETE100A

Бренд: Texas Instruments Страницы: 179

Бренд: Black Box Страницы: 37

Бренд: IBA Страницы: 33

Бренд: ZALMAN Страницы: 7

Octopus G Series

Бренд: TwinMOS Страницы: 29

Бренд: ZALMAN Страницы: 8

Бренд: Renesas Страницы: 76

Бренд: B&B Electronics Страницы: 17

Бренд: TP-Link Страницы: 113

Бренд: VIA Technologies Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды