manualshive.com logo in svg

General DataComm SC-ADT 16 Por, Руководство по установке и эксплуатации

General DataComm SC-ADT 16 Por - продукт, который обеспечивает супербыструю передачу данных. Установочное и операционное руководство также доступно для бесплатного скачивания с сайта manualshive.com. Загрузите его сейчас, чтобы без проблем пользоваться этим устройством.

Поделиться
Скачать
background image

Additional Features

Contact Sense

076R172-000

SpectraComm ADT  

5-11

Issue 6

Installation and Operation Manual

4. If desired, enter an alphanumeric description for the individual contact by typing: 

configure ports description p

[#]

 

[“contact description”]

Note

If a space is desirable in the description, you must use a double-quoted string, as shown above.

5. Enable the individual contact by typing:

configure ports enable p

[#]

6. The system message will indicate that contact sensing has started for that port.

Repeat 

step 2.

 through 

step 5.

 for each dry contact device to be monitored by the SC-ADT.

7. Disable any unused ports at the front panel interface by typing:

configure ports disable p

[#]

8. The SC-ADT is now monitoring the enabled input contact ports at the front panel connector. 

•

To view the current configuration parameters and status of all contact interfaces including 
current state and alarm status, type: 

show ports general

To manually clear an active alarm condition, type:

 configure ports clear p

[#]

If the condition persists after clearing the alarm, a new alarm is generated, sending a new SNMP trap

Figure 5-7

Status Display for Environmental Inputs (Front Panel Ports)

ADT-32% show ports general
____________________________Port Parameters_________________________________
                                                Inactivity
Port    Admin           Telnet                    Timer                 Flow
Name    State  Mode  ACL Port   Status   Monitor  (secs)      Comms    Control
------  ----- ------ --- ---- ---------- ------- --------  ----------  --------
port1    Unavailable: reserved by external dialup modem0
port2    OFF  Term    1  2002  Idle        OFF     900       9600 8N1  hardware
port3    ON   Term    1  2003  Idle        OFF     900       9600 8N1  hardware
port4    ON   Term    1  2004  Idle        OFF     900       9600 8N1  hardware
port5    OFF  Term    1  2005  Idle        OFF     900       9600 8N1  hardware
port6    OFF  Term    1  2006  Idle        OFF     900       9600 8N1  hardware
port7    OFF  Term    1  2007  Idle        OFF     900       9600 8N1  hardware
port8    OFF  Term    1  2008  Idle        OFF     900       9600 8N1  hardware
port9    ON   Tport   -  2009 Tport UP     OFF     900       9600 8N1  hardware
port10   OFF  Term    1  2010  Idle        OFF     900       9600 8N1  hardware
port11   OFF  Term    1  2011  Idle        OFF     900       9600 8N1  hardware
port12   OFF  Term    1  2012  Idle        OFF     900       9600 8N1  hardware
port13   ON   Sense   -  2013  -------     OFF     900       9600 8N1  hardware
port14   OFF  Term    1  2014  Idle        OFF     900       9600 8N1  hardware
port15   ON   Range   -  2015  -------     OFF     900       9600 8N1  hardware
port16   OFF  Term    1  2016  Idle        OFF     900       9600 8N1  hardware
port17   OFF  Term    1  2017  Idle        OFF     900       9600 8N1  hardware
port18   OFF  Term    1  2018  Idle        OFF     900       9600 8N1  hardware
port19   OFF  Term    1  2019  Idle        OFF     900       9600 8N1  hardware
port20   OFF  Term    1  2020  Idle        OFF     900       9600 8N1  hardware
port21   OFF  Term    1  2021  Idle        OFF     900       9600 8N1  hardware
port22   OFF  Term    1  2022  Idle        OFF     900       9600 8N1  hardware
port23   OFF  Term    1  2023  Idle        OFF     900       9600 8N1  hardware
port24   OFF  Term    1  2024  Idle        OFF     900       9600 8N1  hardware
port25   OFF  Term    1  2025  Idle        OFF     900       9600 8N1  hardware
port26   OFF  Term    1  2026  Idle        OFF     900       9600 8N1  hardware
port27   OFF  Term    1  2027  Idle        OFF     900       9600 8N1  hardware
port28   OFF  Term    1  2028  Idle        OFF     900       9600 8N1  hardware
port29   OFF  Term    1  2029  Idle        OFF     900       9600 8N1  hardware
port30   OFF  Term    1  2030  Idle        OFF     900       9600 8N1  hardware
port31   OFF  Term    1  2031  Idle        OFF     900       9600 8N1  hardware
port32   ON   Term    1  2032  Idle        OFF     900       9600 8N1  hardware

Содержание SC-ADT 16 Por











































































































Отзывы:

Нет отзывов

Похожие инструкции для SC-ADT 16 Por

Paradyne 3163 Quick Reference preview
3163
Бренд: Paradyne Страницы: 16
IEI Technology WSB-H610 User Manual preview
WSB-H610
Бренд: IEI Technology Страницы: 187
IEI Technology TANK-XM811 User Manual preview
TANK-XM811
Бренд: IEI Technology Страницы: 71
QNAP QMiroPlus-201W Quick Installation Manual preview
QMiroPlus-201W
Бренд: QNAP Страницы: 20
X-Micro WLAN 11g User Manual preview
WLAN 11g
Бренд: X-Micro Страницы: 74
YASKAWA SI-EP3/V Installation Manual preview
SI-EP3/V
Бренд: YASKAWA Страницы: 68
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Бренд: iDirect Страницы: 52
Internet Security Systems Proventia A1204 User Manual preview
Proventia A1204
Бренд: Internet Security Systems Страницы: 42
East Coast Datacom PDS-1/10G User Manual preview
PDS-1/10G
Бренд: East Coast Datacom Страницы: 19
ActionTec GT704WR User Manual preview
GT704WR
Бренд: ActionTec Страницы: 115
MEDIATEK MT6252 Design Manual preview
MT6252
Бренд: MEDIATEK Страницы: 166
BHU NETWORKS BXM2 User Manual preview
BXM2
Бренд: BHU NETWORKS Страницы: 75
Renesas REJ06B0734-0100 Application Note preview
REJ06B0734-0100
Бренд: Renesas Страницы: 19
ZyXEL Communications G-170S User Manual preview
G-170S
Бренд: ZyXEL Communications Страницы: 79
Supero AOC-1UIPMI-B User Manual preview
AOC-1UIPMI-B
Бренд: Supero Страницы: 53
ZyXEL Communications Prestige 2864I Getting Started preview
Prestige 2864I
Бренд: ZyXEL Communications Страницы: 8
MICRADIGITAL F5D7630uk4A-E Speci?Cations preview
F5D7630uk4A-E
Бренд: MICRADIGITAL Страницы: 2
Pilz PNOZ mc3p Operating Instructions Manual preview
PNOZ mc3p
Бренд: Pilz Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды