General DataComm SC-ADT 16 Por, Руководство по установке и эксплуатации

Страница: 102 / 106

Application Guidelines Using Smart CLI
A-10 SpectraComm ADT 076R172-000
Installation and Operation Manual Issue 6
Entering a Command String
Each command string is executed by pressing the
Enter
key (or <
cr
>). The general syntax is:
command
<subcommand(s)>
if any
<required argument(s)>
if any
Aborting a Command
Use the
CTRL-C
character to abort a command at any time and return to the main prompt.
Command Short Cuts
You only have to type the minimum number of characters needed to identify a command or
subcommand to the CLI. When space or return is entered, the CLI will expand the abbreviation to
the full command name.
For example:
The full command name
configure
may be selected by any of the following:
ADT-16% conf
ADT-16% confi
ADT-16% config
When a space is entered, all of the above strings will expand to
configure
. Extra spaces between
command, subcommands or arguments are ignored. Arguments composed of strings may also be
abbreviated to minimum uniqueness.
Arguments composed of strings such as
configure interfaces enable
[name] may be
abbreviated to minimum uniqueness. Interface names are
ethernet0
,
modem0
,
modem1
,
serial0.
In the command string, the
con int en e0
characters are sufficient to select
ethernet0
. Likewise, the
s0
,
m0
or
m1
characters are sufficient to select either modem or
serial0 interfaces.
Command Recall
There are two ways to recall previously entered commands:
• Arrow UP Recall
Use the
Arrow Up
key to recall previously entered commands in reverse order.
Use the
backspace
key to edit the command string, if needed.
Press
Enter
to execute the command string.
• Command History Recall
Type
show history
to display a numbered history of the previous 20 commands.
At the command prompt, type
!
[##] where ## is the history screen line number of the
desired command.