GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Инструкция по эксплуатации

Страница: 95 / 387

ARTDrive V2 series - Instruction Manual Chapter 6 Function Description • 95
Ramp ref inv src
+1
-1
* -1
* +1
Ai1 output
A na l og i nput 1 Bl oc k
R amp S etpo i nt Bl oc k
N U LL
N U LL
T er minal input
Ramp setpoint
Ramp ref 1 src
AI 1 sgn src
N U LL
AI 1 alt value
AI 1 alt sel src
N
OTE
!
C01.00 - AI 1 alt sel src
source allows you to select the signal to
enable an alternative output reference.
C01.11 - AI 1 alt value
parameter determines the value of the
alternative output reference.
D00.03 - Ramp ref inv src
allows you to select the signal for
inverting the final output setpoint.
6.1.2 Block Functions
Here is an example referring to the setting of a digital signal (
D07.01 - Ramp
output = 0
) and of an analog signal (
F00.00 - Speed ref 1 src
).
N
OTE
!
The points …………, refer to other possibilities parameters in the
menus.
Digital signal
Let’s consider a section of the Ramp Block.
In Ramp funct menu, the source
D07.01 - Ramp output = 0
allows the
output of the RampBlock to be set to zero.
By editing (for example via the keypad by pressing
“Enter”
) the source
D07.01 - Ramp output = 0
, the Pick List 3 of the possible signal sources of
control is displayed.
The selected signal on the source, will be enable the
D07.01 - Ramp output
= 0
function.
D07 REF&RAMP / RampFunct
D07.00-Ramp input = 0
D07.01-Ramp output=0
…………
The following commands are available in the source
D07.01 - Ramp output
= 0
(it is standard connected to
000-Null
), see Pick List 03: