manualshive.com logo in svg

GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Инструкция по эксплуатации

Инструкция по эксплуатации для продукта GEFRAN-SIEI ARTDrive Vector V2 400Vac Series доступна для бесплатного скачивания на нашем сайте. Этот руководство поможет вам правильно использовать и настроить ваш продукт, чтобы обеспечить эффективную работу. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

ARTDrive V2 series - Instruction Manual

  Chapter 11  EMC Directive • 381

Chapter 11 - EMC Directive

EMC Directive
The possible Validity Fields of the EMC Directive (89/336) applied to PDS “CE
marking” 

summarises the presumption of compliance with the Essential Requirements

of the EMC Directive, which is formulated in the EC Declaration of Conformity Clauses
numbers [.] refer to European Commission document “Guide to the Application of
Directive 89/336/EEC” 1997 edition. ISBN 92-828-0762-2

R

elates to PDS or CDM or BDM directly

R

elates to application of PDS or CDM or BDM

Validity Field

-1-

Finished Product/ Complex

component

available to general public

[Clauses: 3.7, 6.2.1, 6.2.3.1 & 6.3.1]

A PDS (or CDM/BDM) of the

Unrestricted Distribution class

-2-

Finished Product/Complex

component

only for professional assemblers

[Clauses: 3.7, 6.2.1, 6.2.3.2 & 6.3.2]

A PDS (or CDM/BDM)

of the Restricted Distribution class

sold to be included as part of a

system or installation

-3-

Installation

[Clause: 6.5]

Several combined items of system,

finished product or other components

brought together at a given place.

May include PDSs (CDM or BDM),

possibly of different classes -

Restricted or Unrestricted

-4-

System

[Clause: 6.4]

Ready to use finished item(s). May

include PDSs (CDM or BDM),

possibly of different classes

- Restricted or Unrestricted

Description

Placed on the market as a single commercial unit for distribution and final use.
Free movement based on compliance with the EMC Directive

- EC Declaration of conformity required - CE marking required
- PDS or CDM/BDM should comply with IEC 1800-3/EN 61800-3

The manufacturer of the PDS (or CDM/BDM) is responsible for the EMC behaviour of the PDS (or CDM/
BDM), under specified conditions. EMC measures outside the item are described in an easy to understand
fashion and could actually be implemented by a layman in the field of EMC.
The EMC responsibility of the assembler of the final product is to follow the manufacturer’s recommendations
and guidelines.
Note: The manufacturer of the PDS (or CDM/BDM) is not responsible for the resulting behaviour of any
system or installation which includes the PDS, see Validity Fields 3 or 4.

Not placed on the marked as a single commercial unit for distribution and final use.
Intended only for professional assemblers who have a level of technical competence to correctly install.

- No EC Declaration of conformity - No CE marking
- PDS or CDM/BDM should comply with IEC 1800-3/EN 61800-3

The manufacturer of the PDS (or CDM/BDM) is responsible for the provision of installation guidelines that
will assist the manufacturer of the apparatus, system or installation to achieve compliance.
The resulting EMC behaviour is the responsibility of the manufacturer of the apparatus, system, or
installation, for which its own standards may apply.

Not intended to be placed on the market as a single functional unit (no free movement).
Each system included is subject to the provisions of the EMC Directive.

- No EC Declaration of conformity - No CE marking
- For the PDSs or CDM/BDMs themselves see Validity Fields 1 or 2
- Responsibility of the manufacturer of the PDS may include commissioning

The resulting EMC behaviour is the responsibility of the manufacturer of the installation in co-operation
with the user (e.g. by following an appropriate EMC plan). Essential protection requirements of EMC
Directive apply regarding the neighbourhood of the installation.

Has a direct function for the final user. Placed on the market for distribution as a single functional unit, or
as units intended to be easily connected together.

-  EC Declaration of conformity required - CE marking required for the system
- For the PDSs or CDM/BDMs themselves see Validity Fields 1 or 2

The resulting EMC behaviour, under specified conditions is the responsibility of the manufacturer of the
system by using a modular or system approach as appropriate.
Note: The manufacturer of the system is not responsible for the resulting behaviour of  any installation
which includes the PDS, see Validity Field 3.

        Examples of application in the different Validity Fields:

1

BDM to be used anywhere:

 (example in domestic premises, or BDM available from commercial distributors), sold without any knowledge of the

purchaser or the application. The manufacture is responsible that sufficient EMC can be achieved even by any unknown customer or layman (snap-
in, switch-on).

2

CDM/BDM or PDS for general purpose

: to be incorporated in a machine or for industrial application This is sold as a subassembly to a professional

assembler who incorporates it in a machine, system or installation. Conditions of use are specified in the manufacturer’s documentation. Exchange of
technical data allows optimization of the EMC solution.. (See restricted distribution definition).

3

Installation:

 It can consist of different commercial units (PDS, mechanics, process control etc.). The conditions of incorporation for the PDS (CDM or

BDM) are specified at the time of the order, consequently an exchange of technical data between supplier and client is possible. The combination of the
various items in the installation should be considered in order to ensure EMC. Harmonic compensation is an evident example of this, for both technical
and economical reasons. (E.g. rolling mill, paper machine, crane, etc.)

4

System:

 Ready to use finished item which includes one or more PDSs (or CDMs/BDMs); e.g. household equipment, air conditioners, standard

machine tools, standard pumping systems, etc.

Содержание ARTDrive Vector V2 400Vac Series




































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ARTDrive Vector V2 400Vac Series

PIETRO FIORENTINI DELTAFLUX MT100 Technical Manual preview
DELTAFLUX MT100
Бренд: PIETRO FIORENTINI Страницы: 16
XBOX 360 Quick Manual preview
360
Бренд: XBOX Страницы: 2
Raymarine P70 Quick Reference preview
P70
Бренд: Raymarine Страницы: 12
Jafar 2005 Operation And Maintenance Manual preview
2005
Бренд: Jafar Страницы: 13
2gig Technologies GC3 Manual preview
GC3
Бренд: 2gig Technologies Страницы: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Бренд: 2gig Technologies Страницы: 2
G1SLE MK2 Alignment Manual preview
MK2
Бренд: G1SLE Страницы: 2
Watts 1717 Installation Instruction preview
1717
Бренд: Watts Страницы: 2
Hanbay RC Series Manual preview
RC Series
Бренд: Hanbay Страницы: 18
BabySafe LUCKY Instruction preview
LUCKY
Бренд: BabySafe Страницы: 24
Daikin Madoka User Manual preview
Madoka
Бренд: Daikin Страницы: 2
Daikin BRC7E530W8 Operation Manual preview
BRC7E530W8
Бренд: Daikin Страницы: 12
Daikin BRC1H81K Installation And Operation Manual preview
BRC1H81K
Бренд: Daikin Страницы: 12
Daikin BRC1H71W Operation Manual preview
BRC1H71W
Бренд: Daikin Страницы: 46
Daikin BRC1D71 Operation Manual preview
BRC1D71
Бренд: Daikin Страницы: 21
Daikin BRC1D517 Operation Manual preview
BRC1D517
Бренд: Daikin Страницы: 20
Danfoss VLT HVAC Operating Instructions Manual preview
VLT HVAC
Бренд: Danfoss Страницы: 85
Danfoss VLT Decentral FCD 300 Operating Instructions Manual preview
VLT Decentral FCD 300
Бренд: Danfoss Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды