GE UR Series L90, Инструкция по эксплуатации

Страница: 814 / 846

E-2 L90 Line Current Differential System GE Multilin
E.1 DEVICE PROFILE DOCUMENT APPENDIX E
E
Requires Application Layer Confirmation:

Never

Always

When reporting Event Data

When sending multi-fragment responses

Sometimes

Configurable
Timeouts while waiting for:
Data Link Confirm:

None

Fixed at ____

Variable

Configurable
Complete Appl. Fragment:

None

Fixed at ____

Variable

Configurable
Application Confirm:

None

Fixed at 10 s

Variable

Configurable
Complete Appl. Response:

None

Fixed at ____

Variable

Configurable
Others:
Transmission Delay: No intentional delay
Need Time Interval: Configurable (default = 24 hrs.)
Select/Operate Arm Timeout: 10 s
Binary input change scanning period: 8 times per power system cycle
Analog input change scanning period: 500 ms
Counter change scanning period: 500 ms
Frozen counter event scanning period: 500 ms
Unsolicited response notification delay: 100 ms
Unsolicited response retry delay configurable 0 to 60 sec.
Sends/Executes Control Operations:
WRITE Binary Outputs

Never

Always

Sometimes

Configurable
SELECT/OPERATE

Never

Always

Sometimes

Configurable
DIRECT OPERATE

Never

Always

Sometimes

Configurable
DIRECT OPERATE – NO ACK

Never

Always

Sometimes

Configurable
Count

1

Never

Always

Sometimes

Configurable
Pulse On

Never

Always

Sometimes

Configurable
Pulse Off

Never

Always

Sometimes

Configurable
Latch On

Never

Always

Sometimes

Configurable
Latch Off

Never

Always

Sometimes

Configurable
Queue

Never

Always

Sometimes

Configurable
Clear Queue

Never

Always

Sometimes

Configurable
Explanation of ‘Sometimes’: Object 12 points are mapped to UR Virtual Inputs. The persistence of Virtual Inputs is
determined by the
VIRTUAL INPUT X TYPE
settings. Both “Pulse On” and “Latch On” operations perform the same func-
tion in the UR; that is, the appropriate Virtual Input is put into the “On” state. If the Virtual Input is set to “Self-Reset”,
it will reset after one pass of FlexLogic. The On/Off times and Count value are ignored. “Pulse Off” and “Latch Off”
operations put the appropriate Virtual Input into the “Off” state. “Trip” and “Close” operations both put the appropriate
Virtual Input into the “On” state.
Table E–1: DNP V3.00 DEVICE PROFILE (Sheet 2 of 3)