GE Masoneilan 469 Series, Инструкция по эксплуатации

Страница: 26 / 348

1–16 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED
 Press the decimal [.] key to enter the text editing mode.
The first character will appear underlined as follows:.
 Press the
VALUE
keys until the character “S” is displayed in the first
position.
 Press the decimal [.] key to store the character and advance the
cursor to the next position.
 Change the second character to a “t” in the same manner.
 Continue entering characters in this way until all characters of the
text “Stn. Monitor” are entered.
Note that a space is selected like a character. If a character is
entered incorrectly, press the decimal [.] key repeatedly until the
cursor returns to the position of the error. Re-enter the character as
required.
 Once complete, press the
ENTER
key to remove the solid cursor and
view the result. Once a character is entered, by pressing the
ENTER
key, it is automatically saved in flash memory, as a new settings.
SWITCH NAME:
General Sw. A
SWITCH NAME:
Stn. Monitor