GE Masoneilan 469 Series, Инструкция по эксплуатации

Страница: 17 / 348

CHAPTER 1: GETTING STARTED
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL 1–7
 Press the
MESSAGE
 key until the
A3 LEARNED DATA
message is
displayed.
 Press the
MESSAGE
 or
ENTER
key to display
MOTOR STARTING
message.
 Press the
MESSAGE
 or
ENTER
key to reach the
LEARNED
ACCELERATION TIME
message and the corresponding actual value.
 Press the
MESSAGE
 key to display the next actual value message
as shown below:
 Press the
MESSAGE
 or
MESSAGE
 keys to scroll the display up
and down through all the actual value displays in this corresponding
sub-page.
 Press the 
MESSAGE
key to reverse the process described above
and return the display to the previous level.
 Press the 
MESSAGE
key twice to return to the
A3 LEARNED DATA
page header.
1.2.2 Panel Keying Example
The following figure gives a specific example of how the keypad is used to navigate
through the menu structure. Specific locations are referred to throughout this manual by
using a ‘path representation’. The example shown in the figure gives the key presses
required to read the learned starting current denoted by the path
A3 LEARNED DATA

MOTOR STARTING

LEARNED STARTING CURRENT
.
 Press the menu key until the relay displays the actual values page.
LEARNED STARTING
CURRENT: 0 A

MOTOR [

]
STARTING

ACTUAL VALUES [

]
A3 LEARNED DATA