GE LOGIQ 9, Техническое руководство

Страница: 389 / 570

GE M
EDICAL
S
YSTEMS
PROPRIETARY TO GE
D
IRECTION
2294854-100, R
EVISION
3 LOGIQ™ 9 P
ROPRIETARY
M
ANUAL
Chapter 8 Replacement Procedures 8-91
8-17-5 AC Transformer Installation Procedure
(cont’d)
.
7.) Compare Rat Guard with illustration in Figure 8-101 above. If it is not already done, use a hack saw
or metal shears and modify Rat Guard according to this illustration.
8.) Install Rat Guard.
9.) Secure Rat Guard with five (5) new plastic expansion plugs, P/N 080X3141.
10.)Install the Lower Rear Cover as shown in
Section 8-2-6 on page 8-10
11.)Install the Upper Rear Cover shown in Section 8-2-3 on page 8-7 .
12.)Install both left- and right-side covers as shown in Section 8-2-2 on page 8-5 .
13.)If required, Power On/Boot-up the scanner as described in Section 4-3-1 on page 4-2 .
14.)Do functional check-out as described.
Figure 8-101 Rat Guard modification
Expansion plugs
36 mm
30 mm
40 mm
15 mm
12 mm