GE M
EDICAL
S
YSTEMS
PROPRIETARY TO GE
D
IRECTION
2294854-100, R
EVISION
3
LOGIQ™ 9 P
ROPRIETARY
M
ANUAL
3-40
Section 3-15 - Optional Software Procedures
3-15-5GE USB Control Panel Driver Loss
11.)In the GENERAL Tab for the hardware device select REINSTALL DRIVER.
12.)Select NEXT in the Driver Upgrade Wizard.
13.)Ensure that the
Search for a suitable driver for my device (recommended)
button is highlighted and
then click on NEXT.
14.)From the Locate Driver Files window select
Specify a location
. Then click on NEXT.
15.)In the
Copy manufacturer’s files from:
drop down box select
C:\WINNT\System32\Drivers
and
select OK
16.)The Found Driver window will appear with the selected driver for the hardware device. Select NEXT
to install the driver.
17.)Select FINISH from the last Driver Upgrade Wizard screen.
There should not be other problems but, if there are other hardware devices that need correcting, repeat
step number 10 through 17.
NOTE:
Double check in the Device Manager the under USB Controllers to ensure that the GE USB
Control Panel has no yellow question marks or exclamation marks in a yellow oval.
18.)Close all windows and select the GO MUSASHI shortcut to start the echoloader application. The
touch panel and GE control panel knobs, buttons and switches should now be fully functional.
Figure 3-32 Good USB Drivers
