GE Eagle 1000, Инструкции по обслуживанию

Страница: 82 / 148

GE Medical Systems EAGLE 1000
Page 82
Information Technologies
Servicing Instructions 227 468 01 Rev.G
Testing connector for measuring patient leakage current
The following wiring of testing connectors is recommended for the technical inspection of
module input type BF (body floating) and type CF (cardiac floating).
The catalog numbers of the Marquette Hellige components are given below.
When making the connectors observe the following configurations:
The diagrams of the plug inserts in this document are always as viewed from the inside of
the connector shell.
- Testing connector for the temperature input
1 x 2-pin jack plug 91530000
1 x Telephone socket or 91534800
matching isolated plug connection for testing case
The two jack plug poles are short-circuited with one another and connected to the
telephone socket.
- Testing connector for ECG input
1* Connector 91541378
10* Contact pins 91541394
1* Telephone socket or 91534800
matching isolated plug connection for testing case
Short-circuit all 10 contact pins with one another and connect to
telephone socket.
- Testing connector for SaO2 input
1* Connector 91541871
7* Contact pins 91541394
1 * Telephone socket or 91534800
matching isolated plug connection for testing case
6* 10 kohm resistor 92184443
Connect pin 10 directly to the telephone socket.
Connect pins 1,4,5,6,7,9 via 10 kohm resistor to telephone socket.
- Testing connector for PRESS input
1* Testing connector parts 91541376
7* 1 kohm resistor 92184430
9* Contact pins 91541394
1* Telephone socket or 91534800
matching isolated plug connection for testing case
Connect pins 7 and 10 directly to telephone socket.
Connect pins 1,2,3,4,6,8,9 separately via 1 kohm resistor to telepho-
ne socket.
1 2
3
4
5
7
8
9 10
6
10
8
6
3
1
5
2
7
4
9
10
1
4
3
2
6
8
5
9
7