GE Eagle 1000, Инструкции по обслуживанию

Страница: 106 / 148

GE Medical Systems EAGLE 1000
Page 106
Information Technologies
Servicing Instructions 227 468 01 Rev.G
Performance check without HELAN
4a Press the Enter key (carriage return is transmitted). The response to this must be the
prompt “boot>”.
This tests the connection from the QuickLink adapter to the QuickLink Station.
5a Enter character “l” for “load” and press the Enter key. Then press the Enter key a se-
cond time after a pause of approx. 5 seconds. This should call up the prompt “userna-
me>”.
This partially tests the performance of the QuickLink Station.
Performance check with HELAN:
“Terminal.exe” program hints: “show server” shows addresses, “help” shows com
mands. The text under “help” can be distorted due to the processing speed of Windows.
4 Press the Enter key. This should call up the prompt “username>“.
5 Enter a series of characters, e.g. “test” and press the Enter key. This should call up the
prompt “local_1>”.
6 Entering “show server” shows the corresponding IP address. This must be either
172.16.1.x or 172.16.2.x or 172.16.3.x or 172.16.4.x.
7 Entering “show port” must call up Gateway address 172.16.0.1 as the “preferred ser-
vice”.
This completes the configuration test.
Performance check with HELAN and Gateway:
8 Still in “local_1>“ enter the command “ping 172.16.0.1”. This should activate a periodic
process on the network.
This completes the testing of the QuickLink Station, as well the performance of the
HELAN and of the TCP/IP.
9 Download test on the HELAN:
Enter “lo” for “logout” and press the Enter key, press the Enter key again after a pause
of approx. 5 seconds. This should call up the prompt “username>”.
10 Enter “eagle1” (in lower case letters) and press the Enter key. This should call up the
prompt “local_1>”. Enter the command “rl” (remote login) and press the Enter key. The
Gateway should now give the message “connection closed”.