Garmin SEAT Portable System Скачать руководство пользователя

Страница: 117 / 176

User’s manual SEAT Portable System

Car info

- 117 -

11.3.5

Stopwatch

Caution!

The driver makes use of the PERFORMANCE DISPLAY

Application (hereinafter the Application) at its own risk, being obliged to

use it pursuant to the Law and shall be liable before SEAT and/or third

parties for any damage resulting from any breach of said obligation. The

Application is designed to be used on closed race tracks only, so that

the driver is not authorised to use it on open roads. The driver must

comply with traffic and safety regulations and is mandatory obligated to

stick to the highway code, speed limits and usage rules of the track and

the limits of the vehicle. While driving, be cautious, aware and

responsible.

Note:

The

TOPWATCH

application is available only when a microSD

memory card is inserted in the device.

In the

TOPWATCH

application yu can measure the time you need to

reach a certain speed or cover a specified distance. The results are

saved and the best times can be viewed.

►

Open the

TOPWATCH

application (see "Open the applications of

the Performance Display window" on page 114).

The following buttons are shown in the

TOPWATCH

window:

Speed (see "Driving against the clock" on page 118)

Set speed (see "Set speed" on page 119)

Distance (see "Driving against the clock", on page 118)

Set distance (see "Set distance" on page 120)

Reset. Deletes all previously saved trips.

Содержание SEAT Portable System

















































































































































































Результаты поиска

Содержание SEAT Portable System

Отзывы:

Похожие инструкции для SEAT Portable System

Бренды по названию

Популярные бренды

Garmin SEAT Portable System, Руководство пользователя

Результаты поиска

Содержание SEAT Portable System

Отзывы:

Похожие инструкции для SEAT Portable System

Бренды по названию

Популярные бренды