Garmin SEAT Portable System Скачать руководство пользователя

Страница: 49 / 176

User’s manual SEAT Portable System

Navigation

- 49 -

Note:

Traffic information (TMC) is then available to a limited extent

only.

No GPS reception

If GPS signal reception is not good enough, the following message will

appear: "Waiting for GPS-Signal…"
You have the following options:

►

Wait. As soon as GPS reception is good enough for determining

your position, the route will be recalculated and navigation will

begin.

►

Tap on Cancel. The window in which you entered your destination

will open again. Your destination is saved in the

AST DESTINATIONS

list.

►

Tap on Demo. The route will be calculated using the centre of the

destination location as starting point. Navigation will then be

simulated on this route.
Tap on

(Back) in order to close the demonstration.

Note:

If you selected the destination on the map, then the Demo button

is not available.

7.3

Managing destinations

Every destination you enter and destinations from the

AST

DESTINATIONS

and

MPORTED ADDRESSES

lists can be saved in the

AVOURITES

list. This makes sense if you frequently navigate to this

particular destination.

Note:

Favourites are indicated on the map by a small flag with their

name.

7.3.1

Saving destinations

1. Enter a destination (see "Entering a destination address " on

page 36 or "Points of interest" on page 39). Do not tap on the Start

navigation button!

2. Tap on Options > Save destination.

- or -

1. Select a destination from the

AST DESTINATIONS

list or from the

MPORTED ADDRESSES

list (see "Last destinations" on page 45 or

"Imported addresses from the phone book" on page 45). Do not tap

on the Start navigation button!

2. Tap on Options > Save as favourite.
3. Enter a name for the destination.

Содержание SEAT Portable System

















































































































































































Результаты поиска

Содержание SEAT Portable System

Отзывы:

Похожие инструкции для SEAT Portable System

Бренды по названию

Популярные бренды

Garmin SEAT Portable System, Руководство пользователя

Результаты поиска

Содержание SEAT Portable System

Отзывы:

Похожие инструкции для SEAT Portable System

Бренды по названию

Популярные бренды