Garmin SEAT Portable System Скачать руководство пользователя

Страница: 17 / 176

User’s manual SEAT Portable System

Switching the navigation device on and off

- 17 -

►

Off

: When you switch off the device, it consumes no energy. It can

then take several months for the battery to become flat. Switching

the device on again triggers a restart which can take some time

(approx. 60 seconds). Your settings and your saved destinations

and routes will be retained.

The procedure for switching the navigation device on and off depends

on whether it is mounted in the vehicle or not.

3.1

Device mounted in the vehicle

When the navigation device is mounted in the vehicle, it does not need

to be switched on or off.

3.1.1

Switching on the device

The navigation device switches on when you switch on the ignition.

Note:

The device also switches on when it is fitted in the vehicle while

the ignition is already on.

If the navigation device was previously set to standby, the window

which was last visible will appear.
If the device was previously switched off, it will take several seconds for

the software to be started again. The

TART

window then appears.

If you want to switch on the device with the engine off, press and hold
the (

On/Off

) key until the device switches on.

3.1.2

Screensaver

Switching on the screensaver

The screensaver is available only under the following conditions:
The device is mounted in the vehicle and is on.
The vehicle's ignition is on.

►

Press briefly on the (

On/Off

) key.

- or -

►

In the

TART

window tap on

(Switch off).

The screensaver will appear. On it you can see the date, the time and

the outdoor temperature.

Содержание SEAT Portable System

















































































































































































Результаты поиска

Содержание SEAT Portable System

Отзывы:

Похожие инструкции для SEAT Portable System

Бренды по названию

Популярные бренды

Garmin SEAT Portable System, Руководство пользователя

Результаты поиска

Содержание SEAT Portable System

Отзывы:

Похожие инструкции для SEAT Portable System

Бренды по названию

Популярные бренды