00012345678906112345678#[email protected]
Wireless LAN (only for bintec R1200w, bintec R1200wu and bintec R3000w)
You can operate your device as an access point and therefore connect individual work sta-
tions (e.g. laptops, PCs with wireless card or wireless adapter) by wireless connections to
your local network via WLAN (Wireless LAN) and let them communicate with each other.
The table "Data for the Wireless LAN configuration" shows the information required.
As data can be transmitted over the air in the WLAN, this data can in theory be intercepted
and read by any attacker with the appropriate resources. Particular attention must therefore
be paid to protecting the wireless connection.
Note the following:
• Follow the safety precautions when configuring your WLAN.
• Please also read the information on WLAN operation published by the Federal Office for
Information Security, see
.
Data for the Wireless LAN configuration
Access data
Example value
Your values
Preshared key for WPA-PSK
without default
Installation location of your device
Germany
Channel to be used for WLAN
3
Network name (SSID) for your
WLAN
without default
Visibility of the network name
not visible
Security setting
WPA-PSK
Company network connection
To connect a remote network (e.g. head office), you need to know some data of the remote
terminal that will take your call. The remote terminal must also know your details. You have
to agree this data between you.
Your device and the device at your head office check before every connection to see if they
should take the call from the partner. To protect the network against unauthorised access,
the call is accepted only after correct authentication. This authentication is based on a com-
mon password and two codes that you and your partner use for the connection.
2 Quick Reference
Funkwerk Enterprise Communications GmbH
18
bintec R1xxx/R3xxx/R4xxx
