Field
Description
If you encounter problems with outgoing calls, ask your provider
whether a special value has to be set.
Clock Mode
Only if Port Usage =
Back to Back (dialup)
Defines which connection partner sends the clock signal for
synchronization between the sender and the recipient. If the
clock signal is not sent by the exchange itself, one of the con-
nection partners must sent the signal.
Possible values:
•
External
: The device receives the clock signal.
•
Internal
: The device sends the clock signal.
ISDN Switch Type
Only if Port Usage =
Leased Line
Select the ISDN connection
type.
Possible values:
•
Leased Line (Custom Time Slots)
: Up to 31 PPP in-
terfaces can be configured for leased lines to different destin-
ations.
•
Leased Line, 1 Hyperchannel (G.703 +
G.704)
:1984 kbps, structured
•
Leased Line Unstructured G.703
: 2048 kbps, unstruc-
tured
Custom Time Slots
Only if Port Usage =
Leased Line
and ISDN Switch Type =
Leased Line (Custom Time Slots)
You have the option to bundle any channels on the physical lay-
er as so-called hyper channels. You can also group together
channels as PPP multilink channel bundles.
Timeslots divide the available 2 Mbps bandwidth of an S2M
connection into logical channels. No distinction is made below
between timeslots and channels, as the difference is immaterial
for configuration purposes.
A list of the channel bundles already configured is shown.
Click Add to configure new channel bundles.
6 Physical interfaces
Funkwerk Enterprise Communications GmbH
168
bintec R1xxx/R3xxx/R4xxx
