explicitly deactivate the import or export of all other routes. You can do this using a filter
for IP Address = no entry (this corresponds to the IP address 0.0.0.0) with Netmask =
no entry (this corresponds to the netmask 0.0.0.0). To make sure this filter is used last, it
must be placed at the lowest position.
You configure a filter for a default route with the following values:
• IP Address = no entry (this corresponds to the IP address 0.0.0.0) with Netmask =
255.255.255.255
In the Routing -> RIP -> RIP Filters menu, a list of all RIP filters is shown.
Fig. 105:
Routing
->
RIP
->
RIP Filters
You can use the
button to insert another filter above the list entry. The configuration
menu for creating a new window opens.
You can use the
button to move the list entry. A dialog box opens, in which you can se-
lect the position to which the filter is to be moved.
9.3.2.1 New
Choose the New button to set up more RIP filters.
Funkwerk Enterprise Communications GmbH
9 Routing
bintec R1xxx/R3xxx/R4xxx
237
