Field
Description
assigned one for you.
Authentication ID
Enter a name that is to be used for authentication.
If you do not enter a name, the name in the User Name field is
used.
Enter a name only if this is explicitly specified by the provider.
Password
The VoIP provider gives you a password for authentication. You
must enter this value here.
A maximum of 40 characters can be entered.
Registration
Specify whether the registration mechanism is to be used by
SIP REGISTER. Normally, every SIP client (user) sends its cur-
rent position to a REGISTRAR server by means of a RE-
GISTER message. This information about the user and his cur-
rent address is held by the REGISTRAR server and queried by
other proxies to find the user.
The function is activated with
Enabled
.
The function is enabled by default.
Expire Time
Only if Registration is enabled.
Enter the time in seconds after which the current registration be-
comes invalid and a new registration request is therefore sent.
Possible values are
0
to
99999
.
The default value is
600
.
In answer to a REGISTER request, a server can set another Ex-
pire Time which overwrites the setting here.
Fields in the SIP Accounts Trunk Settings menu
Field
Description
SIP Header Field(s) for
Caller Address
Only for Trunk Mode =
Client
or Trunk Mode =
Server
.
Specify where and how the DDI sender (caller) address is sent
for outgoing calls. (For incoming calls, the subscriber number is
sought automatically.)
Funkwerk Enterprise Communications GmbH
13 VoIP
bintec R1xxx/R3xxx/R4xxx
399
