Field
Description
Entry in
Seconds
: Enter the lifetime for phase 2 key in seconds.
The value can be a whole number from
0
to
2147483647
. The
default value is
28800
.
Entry in
kBytes
: Enter the lifetime for phase 2 keys as amount
of data processed in Kbytes. The value can be a whole number
from
0
to
2147483647
. The default value is
0
.
The Advanced Settings menu consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
IP Compression
Select whether compression is to be activated before data en-
cryption. If data is compressed effectively, this can result in
higher performance and a lower volume of data to be trans-
ferred. In the case of fast lines or data that cannot be com-
pressed, you are advised against using this option as the per-
formance can be significantly affected by the increased effort
during compression.
The function is activated with
Enabled
.
The function is disabled by default.
Alive Check
Select whether and how IPSec heartbeats are used.
A bintec IPSec heartbeat is implemented to determine whether
or not a Security Association (SA) is still valid. This function
sends and receives signals every 5 seconds, depending on the
configuration. If these signals are not received after 20 seconds,
the SA is discarded as invalid.
Possible values:
•
Down
: Your device sends and expects no heartbeat. Set this
option if you use devices from other manufacturers.
•
Heartbeats (Expect only)
: Your device expects a
heartbeat from the peer but does not send one itself.
•
Heartbeats (Send only)
: Your device expects no heart-
beat from the peer, but sends one itself.
•
Heartbeats (send & expect)
: Your device expects a
heartbeat from the peer and sends one itself.
Funkwerk Enterprise Communications GmbH
11 VPN
bintec R1xxx/R3xxx/R4xxx
333
