• have the data for the basic configuration and the Internet connection to hand and also
gather the data needed for connecting the required WLAN clients.
• check whether the PC from which you want to perform the configuration meets the ne-
cessary requirements.
You can also...
• install the BRICKware software, which provides more tools for working with your device.
This installation is optional and not essential for the configuration or operation of the
device.
2.5.1.1 Gathering data
You can gather the main data for configuration with the Funkwerk Configuration Inter-
face quickly, because you do not need any information that requires in-depth knowledge of
networks.
If necessary, you can use the sample values.
Before you start the configuration, you should gather the data for the following purposes:
• Basic configuration (if your device is in the ex works state)
• Internet access (optional)
• Wireless LAN (optional, only for R1200w, R1200wu and R300w)
• Connecting to a corporate network (optional)
The following table shows examples of possible values for the necessary access data. You
can enter your personal data in the "Your values" column, so that you can refer to these
values later when needed.
If you configure a new network, you can use the given example values for IP addresses
and netmasks. In cases of doubt, ask your system administrator.
Basic configuration
For a basic configuration of your gateway, you need information that relates to your net-
work environment:
Basic information
Access data
Example value
Your values
IP address of your gateway
192.168.0.254
Netmask of your gateway
255.255.255.0
Internet access
2 Quick Reference
Funkwerk Enterprise Communications GmbH
16
bintec R1xxx/R3xxx/R4xxx
