By default, the same configuration applies for all switch ports.
During configuration, please note the following: The splitting of the switch ports into several
Ethernet interfaces merely logically separates these from each other. The available total
bandwidth of 100 mbps full duplex for all resulting interfaces remains the same. For ex-
ample, if you split all the switch ports from each other, each of the resulting interfaces only
uses a part of the total bandwidth. If you group together several switch ports into one inter-
face, the full bandwidth of 100 mbps full duplex is available for all the ports together.
Fig. 78:
Physical Interfaces
->
Ethernet Ports
->
Port Configuration
The Physical Interfaces -> Ethernet Ports -> Port Configuration menu consists of the
following fields:
Fields in the Port Configuration Switch Configuration menu
Field
Description
Switch Port
Shows the respective switch port. The numbering corresponds
to the numbering of the Ethernet ports on the back of the
device.
Ethernet Interface Selec-
tion
Assign an Ethernet interface to the switch port.
You can select from four interfaces,
en1-0
to
en1-3
. In the
basic setting, interface
en1-0
is assigned to all switch ports.
Configured Speed /
Mode
Select the mode in which the interface is to run.
6 Physical interfaces
Funkwerk Enterprise Communications GmbH
160
bintec R1xxx/R3xxx/R4xxx
