Ref / Pt.No: 294130
Operating Instructions for Safe Use
Fullwood M²erlin
Revision: C
Date: 24-Mar-17
294130
Page 11 of 81
•
of the EMERGENCY STOP command device.
•
of any components requiring monitoring.
•
Pay attention to cleanliness during all maintenance and repair work.
•
Do not leave any loose components, tools or cleaning rags on or in the machine.
•
Components removed from the machine can still be dangerous. Do not attempt to
open or destroy any components taken from the machine.
2.10 De-commissioning, storage and disposal
•
Your machine contains a great amount of recyclable material and should be
disposed of according to national and local legislation.
•
Improper handling of old operating fluids and components represent a danger for the
environment. Drain off fluids/materials and dispose of them according to
environmental regulations. These include oils and chemicals and their filters.
•
Waste Electrical and Electronic Equipment shall be removed and disposed of in
accordance with national and local legislation.
•
Dispose of machine in accordance with local environmental regulations or hand over
to an authorised disposal expert.
2.11 Danger Areas
•
During handling and operation of this machine, everyone in the local area should be
aware of the following danger areas:
Activity
Danger area
Authorised personnel
Transport
Within 3 m radius of the
machine/machine parts
Trained installation
personnel for transport
preparation.
No personnel during
transport.
Beneath the lifted
machine/machine parts
No personnel
Installation
With the machine.
Within 1 m radius of the
machine and its supply
cables
Trained installation
personnel
Operation
Operator side - Within 1 m of
machine
Cow side – Within 1 m and
inside the crate (cow area).
Trained and authorised
operating personnel
Maintenance
Within the machine
Within 1 m of the machine
Trained and authorised
maintenance personnel
Decommissioning/
disposal
With the machine.
Within 1 m radius of the
machine and its supply
cables
Trained and authorised
decommissioning/disposal
personnel
Note: The table above relate to the machine danger areas only and do not take into account
any local risks. Please refer to the site risk assessments for site specific danger areas.
