Ref / Pt.No: 294130
Operating Instructions for Safe Use
Fullwood M²erlin
Revision: C
Date: 24-Mar-17
294130
Page 10 of 81
2.6
Users Responsibility
•
Check suitability of animals (e.g. low udders, misplaced teats, temperament)
•
Check services are adequate (Power, Vacuum, Compressed Air, Water)
•
Check calibration of Milk Meters and feed dispensers
•
Check for hazards such as sharp objects that could cause injury to the animals.
•
Check the performance of the animals during milking
•
Follow manufacturers guidelines for cleaning and maintenance
•
Servicing of M²erlin shall be carried out by approved dealers
•
Never allow persons under the influence of drugs or alcohol operate M²erlin
•
Following these instructions along with others within this and other supporting
manuals will help maintain an efficient operating milking machine.
•
The manufacturers guarantee does not cover direct or consequential damage
caused by incorrect installation, incorrect usage, improper treatment, inadequate
cleaning or servicing, or incorrect software parameter inputs or hardware settings.
2.7
Assembly
•
Do not climb onto the machine to gain access to upper areas.
•
When working at height assess the risk and use appropriate equipment.
•
Only use electrical cables that are suitable and approved for the surroundings and
electrical loads applied.
•
Never dismantle compressed air pipes until they are fully vented.
•
Only use pressure lines that are suitable and approved for the maximum working
pressure and intended medium.
•
Do not allow connection pipes to be placed under mechanical stress.
•
Do not induce any forces into the machine via the connections, so that the
compressive forces must be balanced by bracing.
2.8
Positioning
A suitable installation location for the machine prevents malfunction and accidents.
•
Install the machine in accordance with Fullwood plans.
•
Ensure sufficient lighting such that the display can be read and work can be carried
out comfortably and safely.
•
Ensure accessibility so that all work can be carried out without danger.
2.9
Commissioning, operation and maintenance
During commission, operation and maintenance you may be exposed to dangers
resulting from; electricity, pressure and temperature. Careless actions can cause
accidents with severe adverse effects for your health.
•
Allow maintenance work to be carried out only by authorised personnel.
•
Switch off and lock out the power supply isolating device and verify the absence of
voltage.
•
Close shut-off valves or otherwise isolate the machine from the compressed air
network to ensure that no compressed air can flow back into the machine.
•
Do not open the electrical cabinet while the machine is turned on.
•
Carry out regular inspections;
•
for visible damages.
•
of safety installations, guards etc.
