FujiFilm Frontier 570 Скачать руководство пользователя страница 66

Страница: 66 / 146

Click [OK].

• The “Next Timer ON Date/Time Check” screen

appears.

If the post-operational checks are performed
after 0:00 AM, the timer ON date is set for the
following day. Set the timer to current day if
operation will be continued later that day.

If the date and time need to be changed, change
them according to the instructions as shown
below.

(1) Click [Modify].

• The “Next Timer ON Date/Time Change” window

appears.

(2) Select the box to be changed and change date

and time.

(3) Click [OK].

• The dialog box disappears.

Click [Shut Down].

• The data is stored onto the hard disk.

• The processor auto cleaning is performed, and

the processor automatically changes to
STANDBY.

Control returns to the [Main Menu] screen, if
[Cancel] is clicked.

FMPC

distributed by www.minilablaser.com

Содержание Frontier 570



















































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Инструкция по эксплуатации

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды