FujiFilm Frontier 570, Инструкция по эксплуатации

Страница: 85 / 146

85
FMPC
■
Control Strip Storage and Handling Pre-
cautions
REFERENCE:
A control strip is used for checking the performance of
the processing solutions. The package contents are
composed of exposed but unprocessed paper strips,
one reference strip (processed and used as the
density reference), and the correction factor chart for
the reference strip. Process a control strip once a day,
measure the reflection densities (R,G,B) using a
densitometer and check for processing solution
performance.
IMPORTANT
• Place the control strips inside a plastic bag and
store them in a freezer (-10°C/14°F or below).
Storage at room temperatures leads to deterioration
in performance.
• Moisture condensation occurs if the control strips
are processed immediately after they have been
taken out of freezer. This may give rise to
processing unevenness.
• Do not open the folded end of the inner bag under
any light, or the control strips may become fogged
and rendered useless.
8.1.6 DIC Order Back Printing Setup
1
Open the “4 Setup and Maintenance” menu
screen (see Section 8.1).
2
Select “O DIC Order Back Print Setup”, and then
click [START].
3
Select “Yes” for [Back Print], and then click [OK].
4
Select the “END (1)” on the menu bar.
If “No” is selected for “Back Print”, no back print will
be done at all regardless of setting on the Imaging
Controller.
distributed by www.minilablaser.com