FujiFilm Frontier 570 Скачать руководство пользователя страница 96

Страница: 96 / 146

FMPC

Click [OK].

• “Making the backup of the data” message

appears.

Upon completion of the backup, press the
[Cancel] button.

• Operation returns to the “4 Setup and

Maintenance” screen.

Remove the FD from the drive.

IMPORTANT

Make sure that the FD is removed from the FD
drive. If it remains in the drive, the FMPC is not
started up during the next restart.

8.2.8

DI Manager Administrative Setting
(41l)

Set the time to delete the order that is completed on

the DI Controller.

[Selection]

“4 Setup and Maintenance” - “1 System Operation

Setup and Check” - “I DI Manager Administrative

Setting”

[Procedure]

Select the time to be deleted the completed
order on the DI controller.

Click [OK].

• Operation returns to the “4 Setup and

Maintenance” screen.

NMP014

distributed by www.minilablaser.com

Содержание Frontier 570



















































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Инструкция по эксплуатации

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды