FujiFilm Frontier 570 Скачать руководство пользователя страница 117

Страница: 117 / 146

117

FMPC

If, for instance, the calendar timer is set to 5:00

AM and night-time preheating is turned ON at

3:30 AM, all the power will be shut down two

hours later at 5:30 AM.

NOTE:

Night-time preheating is usually conducted when

the room temperature drops below 10 °C (50 °F) at

night and the temperature is not controlled for 8 or

more hours.

(1) Select “YES” for “Preheat Setting”.

• The 1st and 2nd preheat setting boxes appear.

(2) Move the cursor to “1st Preheat” and enter the

time.

(3) Move the cursor to “2nd Preheat” and enter the

time.

NOTE:

For preheating only once, set the same time for

both the first and second times.

• Select “NO” when no preheat timer is used.

• The second preheating timer is ignored if the

first and second times overlap.

<Example>
1st. preheat time:

2:00 AM

2nd. preheat time: 3:00 AM
With the above settings, night-time preheating
will occur from 2:00 AM to 4:00 AM (2 hours).

Click the [OK] button.

• Operation returns to the menu screen.

9.2.6

Error Information Check (415)

[Selection]

“4 Setup and Maintenance” - “1 System Operation

Setup and Check” - “5 Error Information Check”

[Procedure]

The system error log lists up to 300 errors in

descending order of occurrence.

Click the [Log Info.] button.

Click the [OK] button.

• The latest 90 accumulated errors are displayed.

distributed by www.minilablaser.com

Содержание Frontier 570



















































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Инструкция по эксплуатации

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды