FujiFilm Frontier 570 Скачать руководство пользователя страница 63

Страница: 63 / 146

6.2.2

Cleaning Around the Machine

Clean around the machine and then click the
[OK] button.

• The “4 Product Information” screen appears.

6.2.3

Recording the Daily Processing
Volume Data and Clearing the Data

Select the “Negative”, “Reversal”, “Digital Image” or

“All” from the “Film type” box to display production

information respectively.

IMPORTANT

The printing information from the DSC import is not
counted in this screen. Check and save this
information in the “Production Information” in the
FMPC.

Record the daily processing volume data.

To clear the data, follow the steps below.

(1) Click the [Clear] button.

• The “Clear production information?” dialog box

appears.

(2) Click the [OK] button.

• Data is cleared.

F355/375/570

distributed by www.minilablaser.com

Содержание Frontier 570



















































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

FujiFilm Frontier 570, Инструкция по эксплуатации, Страница: 63 / 146

Результаты поиска

Содержание Frontier 570

Отзывы: