122
FMPC
1
Click the [Next Page] button.
“ID”:
Enter the magazine ID.
“P1R”:
Enter the P1R replenishment rate.
“P2R”:
Enter the P2R replenishment rate.
“PSR”:
Enter the PSR replenishment rate.
“Correct value”: Enter the correction value of the
dryer temperature.
[Set] button:
Click this button to register the
entered items.
NOTE:
Do not change the “P1R”, “P2R”, “PSR” and
“Correct value” values.
<Paper Magazine Registration>
1
Open the paper magazine by releasing the
latches.
2
Remove the two screws and adjust the width of
the paper guides. Then tighten the two screws.
Do not try to remove the other parts and covers
secured by the screws.
NOTE:
• Use the appropriate guides according to paper
width.
• Guide C is available as an optional accessory.
3
Loosen the four screws securing the paper
flanges.
4
Align the holes in the paper flanges with the
paper width marks visible through the hole and
tighten the four screws.
Latches (2)
Paper Magazine
L
2
360
Guides
Paper Width
A
Except B and C
B
95/120/130/210
C
114/216
Paper Guides
Screws (2)
L
2
361
L
2
367
distributed by www.minilablaser.com
Содержание Frontier 570
Страница 144: ...distributed by www minilablaser com ...