FujiFilm Frontier 570 Скачать руководство пользователя страница 26

Страница: 26 / 146

3.2.3

Upkeep Printing

With this operation, the system automatically

makes an upkeep print and measures its densities

to produce the same quality prints as those of the

day before. In this way, the system maintains

consistent printing conditions.

Perform upkeep printing with the base channel paper.

Each time the paper width and surface are changed,

print condition setup must be performed.

Install the master magazine.

Click [Print].

• After about 5 minutes, an upkeep print is

delivered to the large-size tray.

Densitometer AD100:

Densitometer AD200/AD300:

After the upkeep print has come out, click [Dens.
Measurement].

Adjust the densitometer guide to match the width
of the upkeep print.

Guides

Densitometer

EZ634

FMPC

distributed by www.minilablaser.com

Содержание Frontier 570



















































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Инструкция по эксплуатации

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды