FujiFilm Frontier 570 Скачать руководство пользователя страница 138

Страница: 138 / 146

138

I-1507

Data backup completed abnormally.

Re-try.

I-1508

Cancel data backup.

—

W-1509

Not enough free space on hard disk. Unnecessary files
have been deleted.

If there are unnecessary files in D drive, delete them.

W-1510

Date value exceeds the limit. (1998/01/01 00:00:00 -
2100/12/31 23:59:59)

1. Enter the correct date/time.
2. Restart the system software. If problems persist,

consult your technical representative.

W-1511

Next timer-ON time exceeds the limit. (1998/01/01
00:00:00 - 2100/12/31 23:59:59) Confirm the present
time.

1. Enter the correct date/time.
2. Restart the system software. If problems persist,

consult your technical representative.

W-1512

Insufficient FD free space. Insert correct FD.

1. Insert the new FD.
2. Replace the FDD.

W-1521

PU800B is not turned ON or is disconnected.
Check the connection with PU800B.
Press [Retry] to retry or [Cancel] to cancel.

Make sure the connection to the PU800B.

W-1522

PU800B is not turned ON or is disconnected.
Check the connection with PU800B.
Press [Retry] to retry or [Cancel] to cancel.

Make sure the connection to the PU800B.

W-1523

Pricing unit is not turned ON or is disconnected.
Check the connection with PU800B. Press [Retry] to
retry.
To cancel printing invoice, press [Cancel]. To stop it,
press [Stop].

Make sure the connection to the PU800B.

W-1524

Backup data for PU800B cannot be read.

Make sure the condition of the floppy disk.

W-1525

Backup data for PU800B cannot be written.

Make sure the condition of the floppy disk.

I-1526

Production information log file not found. Create a new
file.

Wait until the message disappears.

W-1527

Production information cannot be written into file.

Restart the system software. If problems persist, consult
your technical representative.

E-1530

FDi device registration failed. Consult technical
representative.

Restart the system software. If problems persist, consult
your technical representative.

W-1531

"Device registration to FDi failed. Check network
connections. To retry the registration, press [Retry].

1. Start up the DI Controller.
2. Connect the LAN cable correctly.
3. Restart the system software. If problems persist,

consult your technical representative.

W-1534

Order not unlocked. Check the network connections.

1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,

consult your technical representative.

W-1535

Cannot be serviced. Check the network connections.

1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,

consult your technical representative.

E-1536

Cannot be serviced. Consult technical representative.

Restart the system software. If problems persist, consult
your technical representative.

E-1537

Cannot be serviced. Consult technical representative.

Restart the system software. If problems persist, consult
your technical representative.

E-1539

Cannot be serviced. Consult technical representative.

Restart the system software. If problems persist, consult
your technical representative.

W-1541

Print service not performed. Check the network
connections.

1. Connect the LAN cable correctly.
2. Restart the system software. If problems persist,

consult your technical representative.

Message

Actions

distributed by www.minilablaser.com

Содержание Frontier 570



















































































































































Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды

FujiFilm Frontier 570, Инструкция по эксплуатации

Результаты поиска

Содержание Frontier 570

Отзывы:

Похожие инструкции для Frontier 570

Бренды по названию

Популярные бренды