116
FMPC
(3) Remove the FD from the drive, then click the
[OK] button.
IMPORTANT
Make sure that the FD is removed from the FD
drive. If it remains in the drive, the FMPC is not
started up during the next restart.
3
Click [OK].
• Operation returns to the “4 Setup and
Maintenance” screen.
9.2.5
Timer Setup (414)
[Selection]
“4 Setup and Maintenance” - “1 System Operation
Setup and Check” - “4 Timer Setup”
[Procedure]
The present date/time, timer ON date/time and
preheat setup times of the printer processor are
set.
NOTE:
The timer ON date/time of the scanner cannot be
set.
1
To update “Present time setup”, change the date
and time, and click the [OK] button.
NOTE:
To cancel the update, press the [Cancel] button.
2
To change the timer ON date and time, check the
day of the week and enter the time in the “Timer
ON Date/Time Setting” box.
3
Set the preheat timer by following the steps
below, if necessary.
IMPORTANT
The ON time for a night-time preheating
operation must not overlap with the ON time of
the weekly timer since night-time preheating
takes priority and shuts down all power when it is
set OFF.
distributed by www.minilablaser.com
Содержание Frontier 570
Страница 144: ...distributed by www minilablaser com ...
