FujiFilm Frontier 570, Инструкция по эксплуатации

Страница: 123 / 146

123
FMPC
NOTE:
Be careful not to overtighten the screws.
5
Choose the appropriate paper from the table and
install its ID chip to the magazine using the
screw.
<Example>
When adding a 210mm width paper magazine,
install the No. 7 ID chip.
NOTE:
• If paper not shown in the table is newly used,
register or rewrite an unused magazine ID for
the paper and click the [Set] button.
• When a new paper magazine is purchased, refer
to Section 5.1 “When a New Paper Magazine is
Use” (page 83).
6
Click the [Close] button.
• Operation returns to the menu screen.
Magazine
ID
Paper
Width
(mm)
Paper Type
Paper
Length
(m)
Remaining
Length
(m)
Line
Speed
1 89.0 Glossy F 186 186 High
2 102.0 Glossy A 186 186 Low
3 117.0 Glossy A 186 186 Low
4 127.0 Glossy F 186 186 High
5 152.0 Glossy F 186 186 High
6 203.0 Glossy A 90 90 Low
7 210.0 Glossy A 90 90 Low
8 254.0 Glossy A 90 90 Low
9 279.0 Glossy A 90 90 Low
10 305.0 Glossy A 90 90 Low
11 89.0 Glossy A 186 186 Low
12 102.0 Medium
Weight
F 90 90 High
14 127.0 Matte F 186 186 High
15 152.0 Glossy F 186 186 High
16 203.0 Glossy A 90 90 Low
18 254.0 Glossy F 90 90 High
20 305.0 Glossy F 90 90 High
Paper Flanges
Screws (4)
Hole/Paper
Width Mark
L 2 368
ID Chip
Screw
L 2 366
distributed by www.minilablaser.com